F.W. Bell 7030, Instruction Manual

Page: 10 / 126

F.W. BELL Model 7030 Gauss/Tesla Meter Instruction Manual
1-2 Section 1 - Introduction
Table 1-1 Model 7030 gauss/tesla meter List of Features
Flux Density
Measurement
Auto Range and Zeroing Capability
dc and ac Field Measurement up to 50 kHz
Automatic Calibration
Units in gauss (G), tesla (T), amp/meter (A/m), or oersted (Oe)
Temperature Compensated Hall Probes Available
User Interface
Large ¼ VGA Multi-shade Amber Display
Display Arrangement is Configurable by the User
Each Channel’s Common Functions are Activated Quickly Through the Front Panel
Keypad
Other Functions are Accessible Through Graphical Menu System
Comprehensive Help System
Up to Four Configuration Setups May be Stored
Mouse Supported ( Optional )
Support
Functions
Analog and Digital Filtering
Relative Feature Allows Small Fluctuations to be Observed Within a Larger Field
Hold Feature Includes Arithmetic Min/Max Readings Calculated by the Instrument and
Signal Peaks/Valleys of Rapid Changing Pulses
Field Classifiers With Pass/Fail Outputs
Remote Operation
IEEE 488.2 (GPIB) Interface
RS-232C Serial Port Interface
Signal Outputs
Each Channel Has a Corrected and Uncorrected Analog Output
Corrected Outputs Provide up to 50k samples/sec
3V, 10V, and 0-10V Adjustable Full Scale Range Settings
Either Raw or RMS Signals
Vector Summation Output
Probe Styles
Transverse, Axial, and 3-Axis
Temperature Compensated
Low, Medium, and High Field
Standard and Heavy Duty
Software
LabView Drivers Available
On-Site Firmware Updates