F.W. Bell 7030, Instruction Manual

Page: 42 / 126

F.W. BELL Model 7030 Gauss/Tesla Meter Instruction Manual
5-4 Section 5 – User Interface
Position Pointer Over Selection
Press Enter Key, the Selection
Advances to the Next Choice
2.
1.
MENU SYSTEM
(Continued)
Selections
“Selections” contain the possible choices for a function. For example, the
possible settings for an analog filter are ”Auto”, “500 Hz”, “5kHz”, and
“50kHz.” If the current setting is “500Hz”, positioning the “pointer” over the
“selection” and pressing the ENTER key will advance the setting to “5kHz.”
See
Figure 5-3 . When the last choice in a “selection” is reached, pressing
the ENTER key will restart the “selection” choices.
Figure 5-3 Using Selections
Numbers
Numbers act as groups of “selections” where the possible choices for each
digit in the number are the numerals 0-9.
Entering The Menu System
Pressing the MENU key from the measurement screen will access the main
menu. The main menu is shown in
Figure 5-4 . To return to the
measurement screen, press the MENU key again.
Figure 5-4 Main Menu
To enter a sub-menu, position the “pointer” over a “button” and press the
ENTER key. To return to the main menu, press the MENU key.