F.F. Group GPG 1100iS PRO, Original Instructions Manual

Page: 13 / 64

English | 13
www.ffgroup-tools.com
and the mains connection must be protected by
an appropriate fuse.
ROTATING PARTS HAZARDS
Rotating parts can cause serious injury. Avoid
contacting the rotating parts when they are still
in rotation.
NOISE AND VIBRATION HAZARDS
The noise and vibration levels shown in these
instructions are the maximum levels for use of
the machine. Insufficient maintenance has a sig -
nificant impact on vibration and noise emissions.
Consequently, it is necessary to take preventive
steps to eliminate possible damage due to high
levels of noise and stress from vibration. Maintain
the machine well, wear ear protection devices, an-
ti-vibration gloves and take breaks while working.
During a working day, you shall take frequent and
adequate breaks to prevent damage from vibra -
tion and damage to the ears.
WORKING AREA HAZARDS
Thoroughly inspect the whole work area and re -
move anything that could be a hazardous source
or cause damage to the machine. Check that there
are no bystanders, animal or items that could be
damaged within the machine’s range of action.
Work only in daylight, or with suitable artificial
light, in good visibility conditions. Try not to cause
any noise disturbance, by only using this machine
at reasonable times of the day.
Take on a firm and well-balanced position. Where
possible, avoid working on wet, slippery ground
or in any case on uneven or steep ground that
does not guarantee stability for the operator or
proper operation conditions for the machine.
Operate the machine in a free space, away from
surrounding objects or walls to guarantee safe
operation and clean air circulation for the intake.
REMAINING HAZARDS
The machine was built using modern technology
and in accordance with recognized safety rules.
Even when all safety measures are in place, some
remaining hazards, which are not yet evident, may
be present. The operator should use common
sense and take necessary precautions to avoid risk
due to remaining hazards.
PRODUCT SPECIFICATIONS
INTENDED USE
This machine is designed and manufactured to
provide electrical power in areas where utility
power is unavailable or unreliable.
Any other use differing from the above-men -
tioned ones could be hazardous, harm people and
damage things and the machine itself.
IMPROPER USE
The machine must not be used for powering appli-
ances other that the ones it is intended according
to its specifications.
Other examples of improper use may include, but
are not limited, to operation of the machine:
f
Without the original accessories supplied by the
manufacturer.
f
With original accessories but in a way not in ac-
cordance to the instructions.
f
Without original spare parts.
f
With unauthorized modifications.
f
According to the applicable product liability
laws, the manufacturer of the device does not
assume liability for damages to the product or
damages caused by the product that occurs due
to:
f
Improper handling no complied with the operat-
ing instructions.
f
Repairs by third parties and not by authorized
service technicians.
f
Installation of non-original spare parts.
f
Non-intended use.
f
Electrical system breakdown due to operation
of the machine in a manner not compliant with
the electric and VDE regulations.
TECHNICAL DATA PAGE 18
IDENTIFICATION (FIG. 1-2)
1. Transport handle
2. Fuel tank cap
3. Control panel
4. Recoil starter
5. Spark plug access
6. Exhaust
7. Engine oil access
8. Main switch
9. Low oil indicator
10. Overload indicator
11. Power output indicator
12. Engine smart control (ESC) switch
13. AC thermal protection
14. Parallel connection plugs
15. DC thermal protection
16. DC (USB) output
17. Ground terminal
18. DC (Battery charging) output
19. AC output
OPERATION
PREOPERATION
Unpacking and completing the assembly should
be done on a flat and stable surface, with enough
space for moving the machine and its packaging,
always making use of suitable equipment. The as -
sembly should be carried out by trained personnel
at your nearest dealer shop, where necessary.
Fueling and lubrication
WARNING
The machine is delivered without oil and fuel.
This product is equipped with a 4-stroke engine
meaning gasoline should be used in fuel tank and the
engine should be filled with oil.
Fuel specifications: Unleaded gasoline or 90 octane
of higher.
Fuel tank capacity: Refer to “TECHNICAL DATA TA -
BLE”
To fill the machine with fuel (Fig. 3):