F.F. Group CDD 12V PLUS, Original Instructions Manual

Page: 6 / 44

| English 6
TECHNICAL DATA
IDENTIFICATION
1. Variable speed trigger switch
2. Forward/Reverse selector
3. 10mm Keyless chuck
4. Torque collar
5. Speed selector
6. LED work light
7. Battery charge indicator
8. Belt clip
UNPACKING & CHECKING
PACKAGING
Carefully remove the cordless drill from the pack -
aging and examine it for any sign of damage that
may have happened during shipping. Lay the con -
tents out and check them against the parts shown
below. If any part is damaged or missing; please
contact the Customer Service Department and do
not attempt to use the drill. The packaging material
should be retained at least during the guarantee
period: in case the machine needs to be returned
for repair.
Warning! Some of the packaging materials used
may be harmful to children. Do not leave any of
these materials in the reach of children. If any of
the packaging is to be thrown away, make sure they
are disposed of correctly; according to local regu-
lations.
WHATS IN THE BOX
As well as the cordless rotary drill; there are parts
not fitted or attached to it.
• (9) one hour fast charger 2.0A (41303, 41304).
• (10) spare 12V, 2.0Ah battery (41304).
BASIC CORDLESS ROTARY DRILL OPERATIONS
BATTERY CHARGING
Check the mains voltage. Make sure the voltage of
the power source is the same as the voltage speci -
fied on the rating plate of the charger unit. Plug your
mains plug into the power source. The green LED in -
dicator 9.2 will blink indicating stand-by mode. Insert
battery pack into battery compartment of the char-
ger. The red LED indicator will light solid. This indi -
cates that the battery pack is being fast charged au-
tomatically. When the battery pack is fully charged,
the red LED indicator will turn off and the green LED
will illuminate solid. Remove the battery pack from
the charger and unplug.
IMPORTANT CHARGING NOTES: Longest life and
best performance can be obtained if the battery pack
is charged when the surrounding air temperature is
between 18°C and 24°C. DO NOT charge battery pack
in an air temperature below 4.5°C, or above 40.5°C.
This is important and will prevent serious damage
to the battery pack. The charger is designed to fast
charge the battery pack between 0°C and 45°C. If the
battery pack, when inserted, is too cold or too hot,
the charger will not charge. The green LED and the
red LED will blink alternatively and continuously to
indicate this situation. Once the air temperature is
within tolerance, the fast charging will begin.
Article number 41303 41304
Model CDD 12V PLUS
Drill Capacities:
Wood mm 22
Mild Steel mm 10
Maximum Torque Nm 30
Revolutions Per Minute
(no load)
min
-1
0-400/
0-1.300
Chuck Capacity mm 10
Spindle Thread unf 3/8" x 24
Weight (drill & battery) kg 0,960
Sound emission values determined according to
EN 60745-1
Typically the A-weighted noise levels of the product are:
Sound pressure level dB(A) 83,1
Sound power level dB(A) 94,1
Uncertainty K dB 3
Vibration total values a
h
(triax vector sum)
and uncertainty K determined according to EN
60745-1
Drilling:
a
h
m/s
2
2,39
K m/s 2 1,5
Screwdriving:
a
h
m/s
2
1,15
K m/s
2
1,5
Battery:
Type Li-Ion
Voltage V 12
Rating Ah 2.0
Charging time (80%) min 60
Charging time (100%) min 75
Charger:
Rated Voltage V 100-240
Rated Frequency Hz 50/60
Rated Power Input W 35
Rated D.C. Output
Voltage
V DC 12
Rated D.C. Output
Current
A 2,0