background image

English   | 5

www.ffgroup-tools.com

the battery may cause irritation or burns.

SERVICE

Have  your  power  tool  serviced  by  a  qualified  repair 

person using only identical replacement parts. This will 

ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR CORDLESS DRILL 

DRIVERS

 

f

Avoid damage that can be caused by screws, nails and 

other elements in your workpiece; remove them be

-

fore you start working.

 

f

Always check that the supply voltage is the same as the 

voltage indicated on the nameplate of the charger.

 

f

Switch off the power tool immediately when the tool 

insert jams. Be prepared for high reaction torque that 

can cause kickback. The tool insert jams when:

• 

the power tool is subject to overload or

• 

it becomes wedged in the workpiece 

 

f

Use only accessories with an allowable speed match-

ing at least the highest no-load speed of the tool.

 

f

The  tool/charger  is  not  intended  for  use  by  persons 

(including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowl-

edge,  unless  they  have  been  given  supervision  or  in

-

struction concerning use of the tool/charger by a per

-

son responsible for their safety.

 

f

Ensure that children do not play with the tool/charger.

 

f

Hold the machine with a firm grip. High reaction torque 

can briefly occur while driving in and loosening screws.

 

f

Secure the workpiece (a workpiece clamped with 

clamping devices or in a vice is held more securely 

than by hand)

 

f

Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

or fastener may contact hidden wiring or its own cord 

(cutting  accessory  and  fasteners  contacting  a  “live” 

wire may make exposed metal parts of the power tool 

“live” and could give the operator an electric shock)

 

f

Use suitable detectors to find hidden utility lines or call 

the local utility company for assistance (contact with 

electric lines can lead to fire or electrical shock; damag

-

ing a gas line can result in an explosion; penetrating a 

water pipe will cause property damage or an electrical 

shock).

 

f

Always wait until the machine has come to a complete 

stop before placing it down. The tool insert can jam 

and lead to loss of control over the power tool.

 

f

Dust from material such as paint containing lead, 

some wood species, minerals and metal may be harm-

ful (contact with or inhalation of the dust may cause 

allergic  reactions  and/or  respiratory  diseases  to  the 

operator or bystanders); wear a dust mask and work 

with a dust extraction device when connectable.

 

f

Certain kinds of dust are classified as carcinogenic (such 

as oak and beech dust) especially in conjunction with 

additives for wood conditioning; wear a dust mask and 

work with a dust extraction device when connectable.

INSTRUCTIONS FOR CHARGERS AND BAT-

TERIES

1. 

BATTERY CHARGERS

a. 

Before charging, read the instructions.

b.  For indoor use. Do not expose to rain.

c.  Do not charge non-rechargeable batteries.

2. 

BATTERY

a. 

The battery must be removed from the appliance 

before it is scrapped.

b.  The appliance must be disconnected from the sup-

ply mains when removing the battery.

c.  The battery is to be disposed of safely.

d.  Do not use non-rechargeable batteries.

e. 

Do not crush, open or burn the battery. Exposure 

to potentially harmful materials may occur.

f. 

In case of fire use C0

2

 dry chemical extinguisher.

g.  Do not expose to high temperatures >45°C. Cells 

may degrade at high temperatures.

h.  The battery must be charged by a constant current, 

constant voltage transformer.

i.  Charge battery regularly in conditions between 5°C 

to 45°C with the specified charger designed for this 

battery.

j.  Store in a dry, well ventilated area within the rec

-

ommended limits of 10°C to 30°C.

k.  Do not use battery if it has been stored at 5°C or 

less. Allow it to "normalise" at room temperature 

before usage/changing.

l. 

During  decommissioning  remove  the  battery  cell 

for recycling separately to the product, which is 

covered  by  the  waste  electrical  and  electronic 

equipment  directive.  Insulate  the  terminals  with 

adhesive insulating tape to prevent a short circuit, 

fire or explosion occurring.

CONNECTION TO THE POWER SUPPLY

Make sure the power supply information on the ma-

chine's rating plate are compatible with the power 

supply you intend to connect it to. 

This appliance is Class II* and is designed for connec-

tion to a power supply matching that detailed on the 

rating label and compatible with the plug fitted. If an 

extension lead is required, use an approved and com

-

patible lead rated for this appliance. Follow all the 

instruction supplied with the extension lead.

*Double insulated 

 : This product requires no earth 

connection as supplementary insulation is applied to 

the basic insulation to protect against electric shock 

in the event of failure of the basic insulation.

LITHIUM-ION MATERIAL DATA SHEET

 

f

As a substance under normal conditions of use it is not 

considered a hazard to health. In the event of acciden

-

tal  release,  measures  to  prevent  spread  must  be  ad

-

hered. Do not contaminate rivers, waterways or drains.

 

f

Composition of lithium-manganese, lithium-cobalt 

and  lithium  salt  as  the  organic  solvent  electrolyte 

(nonaqueous liquid).

 

f

Hazardous Decomposition: None during normal op

-

erating conditions. If cell is ruptured hydrogen fluo

-

ride and carbon monoxide may be released.

PRODUCT SPECIFICATIONS

INTENDED USE

This cordless drill is designed for use with a variety of drill 

bits, intended for drilling holes in wood, plastic, metal 

etc. It is intended for domestic and light commercial use 

only. Any other application is considered misuse.

Summary of Contents for CDD 12V PLUS













































Reviews: