BEGINNING STEPS
LEAVE EZYLIFT FRAMES SECURED TO PALLET
Remove the tailgate and remove the tail light assemblies.
(Do not remove tail
lights for Chevrolet Installs)
If installing the unit in a Chevrolet Pick Up truck turn to pages 8 through 13
for Arm Frame installation instructions.
Measure the distance between the pick up truck wheel wells. If
the distance exceeds 50” it is necessary to mount the “L” Spacers
to each of the unit Arm Frames.
If it is necessary to mount the “L” Spacers install them with the unit frames still secured to the pallet. On the
front end of the unit frame there are 9 pre-dilled holes, 5 large and 4 small. Count back from the front (cab end) of
the frame and position the vertical end of the “L” Spacer so that the large hole at the axis of the “L” Spacer is
aligned with the second large hole in the frame. Take two of the self tapping screws and attach the “L” Spacer
using the two small holes. Note the illustrations below.
5
