Locate the Winch Power Cable in the pump side arm and pull the ends out of the arm. Connect the power cable
to the fish lead and pull the fish lead through the Winch Power Cable Feed Hole. Set the electrical leads aside.
Loosely secure the crossbar to the unit arm brackets with the
5/16” x 4” bolts, flat washers (on top and bottom) and the 5/16
nylon lock nuts. The crossbar fit into the bracket is extremely
tight. It may be necessary to tap it in place with the rubber mallet.
Connect the Winch Power Cable leads to the winch terminal block. The black lead connects to the red lead.
Connect the green lead to green, the white to white and finally, the blade connection to the blade receptacle.
24
