Take the unit frame that has the hydraulic pump and place it on the
drivers side of the pick up truck bed with the arm end pointing
forward toward the truck cab. Take the remaining unit frame and
place it on the truck bed on the passenger side. Be careful not to
set the unit on the hydraulic pump hoses.
Lift the unit Arm Frame with the hydraulic pump upright with the arm on top. Lean the arm end slightly forward
and move the top end up under the Side Filler. Push the bottom of the Arm Frame in on top of the plastic Mount-
ing Shim and flush with the wheel well. It will be necessary to lift up the Side Filler which should have been at-
tached to the truck bed wall only loosely.
Use the 2 x 4 as a brace to hold the two unit frames in the upright position
until they are secured to the truck bed.
Once the Brace has been placed between the two
Arm Frames pull the two Arm Frames all the way
back to the tailgate posts.
Once the unit Arm Frame is in position under the Side
Filler, pull it completely back towards the tail gate. Make
sure that both frames are equal distance from the rear of
the truck bed.
BRACE
BRACE
BRACE
BRACE
CAB
CAB
CAB
CAB
TAIL GATE
TAIL GATE
TAIL GATE
TAIL GATE
Dodge, Toyota and Ford truck Boom Arm Frame Installations
15
