PREPARE FOR INSTALLATION
Completely empty the truck bed. Once empty it is recommended that the bed be power washed prior to installa-
tion.
Bed Liners
Spray-in bed liners provide an acceptable mounting surface for Ezy-Lift installations.
However, hard
plastic drop-in bed liners must be removed from the truck bed in order to provide a solid mounting suitable
for installing Ezy-Lift.
It Takes Two.
Several steps in the installation require the help of another person, for example
placing components properly, or attaching backing plates under the bed.
Identify all compo-
nents
supplied in the installation kit and match them with the parts list. If any components are missing, contact
Ezy-Lift Tech Support at 713.589.9449 before beginning installation.
Park the truck on a level surface, set the parking brake and chock the wheels for safety.
Tools Needed
Rivet Nut Tool (Included—Dodge Only)
Standard Open End Wrench Set
Drill
Metric Open End Wrench Set
Tape Measure
Drill Bit Set
Ratchet
1” Metal Hole Saw Bit
Rasp
Saw
Standard Deep Socket Set
5 Foot 2 x 4 Lumber
Standard Hex Socket Set
Rubber Mallet
Electrical Cord
#2 Phillips Drill Bit
Attaching Pieces Included (Hardware Package)
Description
Description
5/16x1-1/4 Button Head Screw
5/16 Nylon Lock Nuts
1/4x3/4 Button Head Screw
5/16 Nuts
3/4 Self Tapping Screw
Rubber Grommets
5/16 x 4 Hex Head Bolts
Black Tie Wraps
5/16 Flat Washer
Crossbar End Caps
1/4 Flat Washer
Anchor Points (Chevrolet Only)
5/16 Lock Washer
Rivet Nuts (Dodge Only)
Qty
18
17
16
6
19
20
10
Qty
6
18
5
20
2
8
4
Extra Parts
The Ezy-Lift is shipped with a few extra attaching parts i.e. screws, washers, nuts, and bolts to ensure
that there is enough to complete the installation. Having leftover attaching parts is normal.
3
