Connecting the Electrical Cords
Open the red Power Cord package. Locate the long red Power Cord and lay it out the length of the truck along
side the driver’s side. Find the Fuse Box and Fuse and the short Power Cord. Position the short cord from the
battery to a clear area of the truck’s engine compartment firewall. Mount the Fuse Box to the firewall in this
area. Connect the short cord to the Fuse Terminal closest to the battery. Pass the end of the long up into the
engine compartment and connect it to the other Fuse Terminal. Place the Fuse Box cover on the Fuse Box and
secure.
Run the long Power Cord under the truck bed and attach it to the chassis with
the supplied tie wraps.
Feed the positive up through the remaining hole, which should
be the hole closest to the tail-gate. Attach the red power to the
power terminal marked “Line” on the On/Off Switch. Run the
ground line from where it is secured on the lift frame run it
down through the same hole and mount it to the chassis under
the truck. Insure that the terminal attaching points are clean to
bare metal. Connect the Power Cord to the truck’s battery ter-
minal.
21
