7-2-2 Cleaning or changing suction (outlet) filter
1) Open the maintenance port on the right side of unit.
2) Release three lock holders.
3) Detach the case cover, and take out the element.
4) Tap the element, and spray air to clean it.
*f the dirt is severe, wash with a mild detergent and
dry thoroughly.
*If stains are not removed or the mesh is broken,
replace with a new element.
5) Assemble parts by reversing procedure.
Code No.
Part name
Remarks
179960
Air filter
Maintenance port
7-3 Cleaning evaporating tube and cyclone
Handle glass wares carefully.
When attaching and detaching the glass part,
please pay attention to handling so that it will
not be damaged during cleaning.
Caution
Cyclone
Connector
Packing (SC)
①
Loosen
Connection collar
1) Lift up the connecting collar and remove it from the
cyclone.
2) Loosen the connector to remove the cyclone from
the evaporating tube.
*When removing it, packing (SC) may come off: be
careful about the loss.
-31-
Open
②
Remove
Cover
Element
Draw latch
Case
