Extron electronics IN1608 xi IPCP MA 70, User Manual

Page: 116 / 144

IN1608 xi Scaling Presentation Switcher • Internal Web Pages 108
4. In the
Hold Time
field (see figure 67 ,
6
on page 105), adjust the value by one of the
following methods:
•
Enter a value in the
Hold Time
field and press the <
Enter
> or <
Tab
> key.
•
Click the
Up
or
Down
arrow buttons. The default value is 1000 ms.
5. In the
Release Time
field (
7
), adjust the value by one of the following methods:
•
Enter a value in the
Release
Time field and press the <
Enter
> or <
Tab
> key.
•
Click the
Up
or
Down
arrow buttons.
6. In the list of
Duck
(target)
checkboxes (
8
), select the targets to attenuate when the
threshold is met. Only selected inputs are ducked.
NOTE: Only one mic input can be selected as a duck target at a time.
7. For those targets checked in step 6, adjust the adjacent
Duck By
field (
9
) in one of the
following methods:
•
Enter a value in the
Duck By
field and press the <
Enter
> or <
Tab
> key.
•
Click the
Up
or
Down
arrow buttons. The default is 20 dB. If additional attenuation of
a target is required, increase this value.
Audio mix configuration
After the audio inputs have been properly configured, select the
Mix Controls
tab (see
figure 68,
1
) to mix microphone levels, create a mix of the microphone and program
volume, and set bass and treble settings.
Figure 68. Mix Controls Tab