Extron electronics IN1608 xi IPCP MA 70, User Manual, Page: 125 / 144

IN1608 xi Scaling Presentation Switcher • Internal Web Pages 117
NOTES:
• Amplified output is for amplifier and IPCP models only.
• By default, all possible group members are selected for groups 1-7.
•
The default selected group members for group 8 are amplified output (amplifier and
IPCP models only) and variable analog output.
To configure the groups:
1. Click the
Mix Controls
tab (see figure 68 ,
1
, on page 108).
2. In the
Group Controls
panel, click the
Configure Groups
button (
¢
). The
Configure
Groups
dialog box opens.
Figure 75. Configure Groups Dialog Box
3. For the desired group master, click the corresponding drop-down menu
(see figure 75,
1
) to display a list of available group members.
When changes are made to the associated control in the software, only the selected
group members are affected (see the
table on the previous page).
To assign a volume control to the front panel volume knob:
1. Click the
Mix Controls
tab (see figure 68 ,
1
, on page 108).
2. In the
Group Controls
panel, click the
Configure Groups
button (
¢
). The
Configure
Groups
dialog box opens.
3. From the
Front Panel Volume Knob
list (see figure 75,
2
), select the desired volume
control the front panel volume knob adjusts. The available options are:
• Program Volume (Group #1)
— Adjusts the program audio (default).
• Mic Volume (Group #3)
— Adjusts microphone volume.
• Output Volume (Group #8)
— Adjusts the output volume.
Group members
Group members are individual controls that comprise the group master. They can be
controlled individually, allowing for relative levels between members to be adjusted.
NOTE: Individual members of a mute group master that are muted outside of the group
master remain muted regardless of the current group master state.