Extron electronics IN1608 xi IPCP MA 70, User Manual

Page: 130 / 144

IN1608 xi Scaling Presentation Switcher • Internal Web Pages 122
• Custom
— Lets you select a screen color that is displayed when the screen saver is
enabled. Do either of the following:
•
Click the desired screen color in the swatch table. The RGB value of the
selected color is displayed in the
RGB Color Value
field.
•
Enter a color value in the
RGB Color Value
field and click the
Apply
button
next to it.
2. Select a duration to display the screen saver before the output sync is disabled.
•
Select the
Disable Sync After
checkbox to disable the scaler output sync after a
set duration without an active input. When selected, the
Duration On Screen
field
becomes available.
•
In the
Duration
field, enter a value in the field or click the
Up
and
Down
arrows to
specify a duration to wait before disabling output sync during inactivity. The default
is to never disable the output sync.
HDCP Notification panel
HDCP notification indicates when HDCP content restrictions prevent a video signal from
passing. Select one of the following radio buttons (see
figure 80 ,
2
, on the previous page):
•
Black
— Displays a black or muted screen when an encrypted source is sent to a
display that is not HDCP-compliant.
•
Green
— Displays a green screen when an encrypted source is displayed on a sink that
is not HDCP-compliant (default).
OSD Input Information panel
1.
To display input information on the OSD after input selection, select the
Enable On
Screen Display (OSD)
checkbox (
3
).
2. In the
Duration On Screen
field, enter a value or click the
Up
or
Down
arrow button to
set a duration the information is displayed on the on-screen menu. The default value is
3.
Auto Switch panel
Auto switch mode automatically switches inputs based on detected input signals.
1. Select the
Enable Auto Switch
checkbox (
4
) to enable auto switch mode.
2. Click the radio button of the desired type of auto switch mode from the following:
• Priority to the highest active input number
— Automatically switches the
input to the highest numbered active input.
• Priority to the lowest active input number
— Automatically switches the
input to the lowest numbered active input.
Mute Video and Sync panel
Click the
Mute Video and Sync
button (
5
) to mute the active video and disable sync on
the HDMI outputs.