Extron electronics IN1608 xi IPCP MA 70 Page 141 User Manual Download

Page: 141 / 144

IN1608 xi Scaling Presentation Switcher • Reference Information 133

Reference
Information

This section provides reference or supplemental information. Topics in this section include:

•

Mounting

•

Downloading Updated Firmware

Mounting

Tabletop Mounting

Attach the provided rubber feet to the bottom four corners of the enclosure.

Rack Mounting

Mount the scalers into racks with the pre-installed rack ears (see

UL Guidelines for rack

mounted devices

on the next page). To install the device, line up the screw holes on the

rack ears on both side of the device with the screw holes in the rack so they device is level.
Use the provided screws to attach the device to the rack.

Rack Ears

Rack Mounting

Rack Ears

Figure 92.

1U Rack Mounting

Figure 93.

2U Rack Mounting

Summary of Contents for IN1608 xi IPCP MA 70

















































































































































Search results

Summary of Contents for IN1608 xi IPCP MA 70

Reviews:

Related manuals for IN1608 xi IPCP MA 70

Brands by name

Popular brands

Extron electronics IN1608 xi IPCP MA 70, User Manual

Search results

Summary of Contents for IN1608 xi IPCP MA 70

Reviews:

Related manuals for IN1608 xi IPCP MA 70

Brands by name

Popular brands