IN1608 xi Scaling Presentation Switcher • Internal Web Pages
105
To optimize input gain with pink noise:
1.
Click the
Line
Input
tab (see
on page 103).
2.
For the web pages only: if necessary, select the
Enable
Meters
checkbox (
).
NOTE:
Meters are automatically enabled on the PCS.
3.
Set the input gain so the meters read approximately -20 dBFS.
4.
If the audio source has an output level setting control, set the output of the player to the
maximum or 0 dB of attenuation.
5.
If the maximum output setting provides gain, adjust the gain slightly lower than the
maximum setting.
6.
If the pink noise is being generated by a signal generator, set the output to -10 dBu.
Microphone audio input configuration
There are two mic/line inputs for the IN1608 xi. The
Mic/Line
Input
tab contains options
to apply phantom power or a high pass filter to the microphone inputs, set ducking
parameters, or adjust input gain on the microphone inputs.
Figure 67.
Mic/Line Input Tab
NOTE:
Features for mic/line 1 and 2 are the same.
