DVS 510 Series • Operation
41
MAX
MID
MIN
VOLUME
MAX
MID
MIN
VOLUME
MAX
MID
MIN
VOLUME
MAX
MID
MIN
VOLUME
MAX
MID
MIN
VOLUME
MIN LED flashes when
volume level is at
0% or audio muted.
MIN LED on solid when
volume level is at
1% or higher.
MID LED on solid when
volume level is at
50% or higher.
MAX LED on solid when
volume level is at
80% or higher.
MAX LED flashes when
volume level is at
100% (maximum).
Figure 24.
Volume Indicator LEDs on the Front Panel
Audio or Video Breakaway
To switch the audio or the video separately away from the current input to another input
(audio or video breakaway), enter an audio
or
a video input selection SIS command (see
on page 57). When the audio is switched from one input
to another (audio breakaway), the audio switch effect is always a fade, regardless of the
selected video effect. During audio or video breakaway, the audio input button lights red and
the video button lights green. Audio or video breakaway is not available while the DVS is in
PIP mode.
Resetting
The rear panel has a recessed
RESET
button that initiates various levels of resets. To select
different reset levels, use a pointed stylus or small Philips screwdriver to press and hold the
button while the DVS is running or press and hold the button while applying power to the
scaler.
NOTE:
You can also reset the unit to factory defaults using SIS commands (see the
on page 68) or from the front panel (see the
ATTENTION:
•
Review the reset modes carefully. Using the wrong reset mode may result in
unintended loss of flash memory programming, port reassignment, or scaler reboot.
The
provides a summary of the reset modes.
•
Analysez minutieusement les différents modes de réinitialisation (voir
). Appliquer le mauvais mode de réinitialisation peut causer une perte
inattendue de la programmation de la mémoire flash, une reconfiguration des ports
ou une réinitialisation du processeur.
NOTES:
•
The reset modes listed in the table on the next page close all open IP and Telnet
connections and all sockets.
•
Each mode is a separate function, not a continuation from mode 1 to mode 5.
•
There is no reset mode 2 for the DVS 510 Series.
