DVS 510 Series • Remote Configuration and Control
68
Command
ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Resets
Erase flash memory
24
E
ZFFF
}
Zpf
]
Clear all data from flash memory.
Reset audio settings
E
ZA
}
Zpa
]
Reset the audio input gain and global
treble and bass settings to
0
.
Reset all audio settings
E
ZAAA
}
Zaa
]
Reset all audio settings to the factory
defaults.
Reset all settings to
factory defaults
E
ZXXX
}
Zpx
]
Reset all settings and adjustments to the
factory default settings.
Absolute system reset
E
ZQQQ
}
Zpq
]
Reset all settings and adjustments to
the factory defaults, the IP address to
192.168.254.254
, and the subnet
mask to
255.255.0.0
.
System reset retaining
IP settings
E
ZY
}
Zpy
]
Reset all settings and adjustments to
the factory default settings except IP
settings: IP address, subnet mask,
gateway IP address, unit name, DHCP
setting, and port mapping (Telnet, Web,
and direct access). This preserves
communication with the device, and is
recommended after a firmware update.
