DTP T EU 332, DTP T EU 232, DTP T MK 332, and DTP T MK 232 • Installation and Operation
12
Connection and Wiring Details
HDMI Connector
Use the LockIt Lacing Bracket, supplied with the switcher, to securely fasten HDMI cable to
device. The following instructions describe how to attach one HDMI LockIt Lacing Bracket.
For more stability, attach a second HDMI LockIt Lacing Bracket to the other mounting
screw.
1.
Plug the HDMI cable into the panel connection (see figure 9).
HDMI IN
1
2
3
4
4
4
5
5
5
Figure 9.
Installing the LockIt Lacing Bracket
2.
Loosen the HDMI connection mounting screw from the panel enough to allow the
LockIt lacing bracket to be placed over it. The screw does not have to be removed.
3.
Place the LockIt lacing bracket on the screw and against the HDMI connector, then
tighten the screw to secure the bracket.
ATTENTION
:
•
Do not overtighten the HDMI connector mounting screw. The shield to which it
fastens
is very thin and can easily be stripped
.
•
Ne serrez pas trop la vis de montage du connecteur HDMI. Le blindage auquel
elle est attachée est très fin et peut facilement être dénudé.
4.
Loosely place the included tie wrap around the HDMI connector and the LockIt lacing
bracket as shown.
5.
While holding the connector securely against the lacing bracket, use pliers or similar
tools to tighten the tie wrap, then remove any excess length.
