Extron electronics DSC HD-HD 4K Plus A Series, User Manual, Page: 86 / 92

•
Input panel:
•
If the input signal is HDCP encrypted, the
Input
status field
displays a closed lock icon followed by
HDCP
(see the illustration at
right).
•
If the input signal is NOT HDCP encrypted, the
Input
status field
displays an open lock icon (
2
).
•
If no device is connected to the HDMI input , the input status field
displays a dash (
—
).
•
Output panel:
•
If the attached sink is HDCP compliant , the output status field displays a
lock icon with a check mark (
4
).
•
If the sink is non-HDCP compliant, this field displays an open lock icon
with an X on it.
•
If no device is connected to the output connector, the output status field
displays a dash (
—
).
NOTE: Figure 40 shows an
HDMI Status
panel for a DSC HD-HD 4K Plus A,
non-xi model. The
HDMI Status
panel for the xi model displays information for
two inputs and outputs.
B
Communication Settings — This panel contains the current TCP/IP and RS-232
connection settings. It also has an
Edit
button that lets you access the IP settings for
editing. The RS-232 settings are view-only and cannot be changed.
Editing the TCP/IP settings
1. In the
Communication Settings
panel (see figure 39 ,
B
, on the previous page)
click the
Edit
button. The following dialog box opens:
Figure 41. Communication Settings Dialog Box
2. Enter the desired settings in the
IP Address
,
Subnet Mask
, and
Default
Gateway
fields (see figure 41,
2
). The
Use DHCP
checkbox must be cleared for
you to edit these fields.
Alternatively, select the
Use DHCP
checkbox (
1
) to have the unit obtain its IP
address from a DHCP server.
If you want to reset all IP settings to their factory defaults, click
Reset to
Default
, then click
Reset
on the confirmation prompt that opens.
3. Click
Apply
to confirm the settings and close the dialog box.
DSC HD-HD 4K Plus A Series • Remote Configuration and Control 78