7.
Press
Enter
to confirm your new values. Press it again if action confirmation is
required.
8.
Do any of the following:
•
Press the
or
button to move to another item on the submenu and repeat
steps 5 through 7.
•
Press
t
to exit the submenu. The yellow outline is removed from the item and
returns to the submenu name. If desired, use the
and
buttons to select
another submenu.
•
Press
Menu
to exit the submenu and close the
OSD
menu.
NOTES:
•
Settings in submenus that do not apply to the current input are shown as
N/A
.
•
An asterisk following an item indicates that it is the default value.
•
The OSD times out and closes after 1 minute if no buttons are pressed.
Quick Setup Submenu
This submenu provides access to common DSC settings.
Figure 21.
Quick Setup Submenu
From the
Quick
Setup
submenu you can configure the following:
•
Input EDID
— Select this item to match the input EDID to the output rate or to set
a discrete EDID (see the
on page 26 for EDID data).
The default is
Auto
(match the current output resolution).
•
Output Rate
— Select this item to set the scaler output resolution and refresh
rate. The DSC HD-HD 4K Plus A Series scalers have 80 factory installed output
resolutions and rates and three custom user defined blocks for new resolutions (see
the
Output Resolutions and Refresh Rates Table
on page 29). The default setting
is
1080p
@
60
Hz
.
DSC HD-HD 4K Plus A Series • Operation
22