To use this submenu, press
Enter
to select this item, then press the
or
buttons to
step through the selections.
•
Audio Mute
— Select this item to mute and unmute the output audio. You can make
the following audio mute selections:
•
Off
— No audio output is muted (default).
•
Analog
— Mutes the analog audio output only.
•
Digital
— Mutes the embedded digital audio output only.
•
On
— Mutes both the analog and the embedded digital audio outputs.
•
Input Audio Format
— Select this item to choose the audio format for the input. The
first item on the
Audio
menu shows the selected format of the audio.
Audio Format
Selection
Details
None
Configures input EDID with no audio support. All audio outputs
are muted.
Analog
Audio
Configures input EDID with no audio support. Analog audio
from the 5-pole captive screw input is embedded into the
HDMI output.
LPCM-2Ch
Configures input EDID for LPCM-2Ch support. Passes all
digital audio input signals to the HDMI outputs. If LPCM-2Ch
audio is present it is also de-embedded to the 5-pole captive
screw analog output.
Multi-Ch
Configures input EDID for Multi-Ch support. Passes all digital
audio input signals to the HDMI outputs. If LPCM-2Ch audio
is present it is also de-embedded to the 5-pole captive screw
analog output.
LPCM-2Ch
Auto
Configures input EDID for LPCM-2Ch support. Passes all
digital audio input signals to the HDMI outputs. If LPCM-2Ch
audio is present it is also de-embedded to the analog 5-pole
captive screw output.
If no embedded audio is present on the input the DSC passes
analog audio from the 5-pole captive screw input.
Multi-Ch
Auto
Configures input EDID for Multi-Ch support. Passes all digital
audio input signals to the HDMI outputs. If LPCM-2Ch audio
is present it is also de-embedded to the analog 5-pole captive
screw output. If no embedded audio is present on the input,
the DSC passes analog audio from the 5-pole captive screw
input.
•
Output Audio Format
— Select this item to specify stereo or dual mono (
Mono
) for
the analog audio output. Press
Enter
to select this item, then press the
or
buttons to toggle between the two formats. The default is
Stereo
.
•
Analog Gain
— Select this item to set the analog input gain value. Press
Enter
to
select this item, then press the
or
buttons to increase or decrease the gain in
1 dB increments. The range is
-18
dB
through
+24
dB
. The default is
12
dB
.
•
Volume
— Select this item to set the volume level in decibels for both the analog and
embedded digital audio outputs. Press
Enter
to select the item, then press the
or
buttons to raise or lower the volume in increments of 1 dB. The range is
-100
dB
through
0
dB
. The default is
-10
dB
.
DSC HD-HD 4K Plus A Series • Operation
32