Extron electronics DSC HD-HD 4K Plus A Series, User Manual, Page: 38 / 92

• Output Format — This item lets you set the HDMI output format and control the
output colorspace.
To select the format:
1.
Select
Output Format
from the
Output
submenu and press
Enter
.
2. Press the

or

buttons to select the format.
3. Press
Enter
to confirm your selection.
4. Press
t
to return to the
Output
submenu.
The format choices are:
•
Auto
(based on the EDID of the sink) (default)
•
DVI RGB 444
•
HDMI RGB 444 Full
•
HDMI RGB 444 Ltd
•
HDMI YUV 444 Ltd
•
HDMI YUV 422 Ltd
•
HDMI YUV 420 Ltd
• HDCP Notification — This item lets you select what is displayed on the HDMI
output when the input signal contains HDCP-protected content and the output is a
non-HDCP sink. After pressing
Enter
to select this item, press the

or

arrow
buttons to select between:
• Green w/OSD
— Displays a green screen with the message
HDCP Content
on the
HDMI output display (default).
• Black Screen
— Displays a black screen and the output sync is maintained.
• User File
— Displays a user-uploaded image. To upload images, use the PCS
software
Logo
screen (see the program help file for the procedure).
• Input AFL — This item lets you enable and disable the Extron Accu-RATE Frame
Lock (AFL). After pressing
Enter
to select this item, press the

or

arrow buttons
to toggle Input AFL on and off. The default is
Off
.
When
On
is selected, frame lock mode locks the output vertical refresh rate to the
vertical refresh rate of the currently selected input using Accu-RATE Frame Lock
technology. This ensures no frames of the input are repeated or dropped due to frame
rate conversion. Input AFL mode can cause glitches or interruptions in the output
sync when a new signal has been routed to the input, because the DSC locks to the
new vertical refresh rate.
NOTE: AFL locks the output refresh rate to the vertical rate of the input signal
only if they are similar frequencies. If the input refresh rate greatly differs from the
set output resolution, the DSC may not output a signal or may blink.
• Logo — Select this item to enable or disable display of a user-uploaded logo image.
There are 16 slots available for storing logo files. To upload a logo file to the unit, use
the
Logo
page of the PCS configuration program (see the program help file for the
procedure).
To select a logo to display:
1. Select
Logo
from the
Output
menu and press
Enter
.
2. Press the

button to move the yellow selection arrows to the logo names list.
DSC HD-HD 4K Plus A • Operation 30