Input Submenu
This submenu allows you to perform certain input adjustments.
Figure 24.
Input Submenu
From the
Input
submenu, you can configure the following:
•
Film Detect
— Select this item to enable and disable film detection, which helps
maximize image detail and sharpness for video sources originating from film. After
pressing
Enter
to select the item, press the
or
arrow buttons to toggle
between
On
(default) and
Off
.
If
On
is selected, the DSC detects and applies reverse pull-down for:
•
3:2 pull-down for 480i and 1080i @ 59.94 Hz
•
2:2 and 24:1 pull-down for 576i and 1080i @ 50 Hz
•
Active Video
— This view-only field shows the width in pixels (the
H
value) and the
height in lines (the
V
value) of the applied input signal.
•
HDCP Authorized
— Select this item to enable or disable HDCP communication by
selecting whether the DSC input will report to the source as an authorized HDCP sink.
After pressing
Enter
to select this item, press the
or
arrow buttons to toggle
between
On
(default) and
Off
.
Setting HDCP authorization to
Off
is useful for devices that always encrypt their
output if the downstream sink is capable of HDCP. If HDCP Authorized is disabled,
most content from these sources can be passed as a non-encrypted signal. In a
video system that should not transmit HDCP encrypted data, such as broadcast
or streaming environments, HDCP authorization should be disabled at the input to
ensure that the output remains unencrypted.
DSC HD-HD 4K Plus A Series • Operation
25