The following picture settings can be adjusted:
•
Auto-Image
— Select this item, then press
Enter
to perform a one-time Auto-Image
on the video input (see
on page 37 for more information about this
function).
•
Image Position
— Select this item to adjust the horizontal and vertical position of the
image on the display. The ranges are:
•
Horizontal position:
-4096
through
+4096
pixels
•
Vertical position:
-2160
through
+2160
lines
•
Image Size
— Select this item to adjust the horizontal size (width) and vertical size
(height) of the image. The ranges are:
•
Horizontal size:
10
through
8192
of signal
•
Vertical size:
10
through
4320
of signal
•
Brightness
— Select this item to adjust the black level of the video signal. The range
is
0
through
127
. The default is
64
.
•
Contrast
— Select this item to adjust the range of white to black levels of the video
signal. The range is
0
through
127
. The default is
64
.
•
Detail
— Select this item to adjust the image sharpness. The range is
0
to
127
. The
default is
64
).
NOTE:
An asterisk (*) before a value on a screen indicates that it is the default.
Adjusting the picture controls
When you select a
Picture
Controls
submenu item, the
OSD
menu collapses so that the
item is displayed alone on the screen to facilitate adjustment (see figure 23). The separate
item field contains yellow arrows that indicate which front panel arrow buttons to press to
adjust the item.
Image Position
H: 0000 V: 0000
Figure 23.
Example of a Selected Picture Controls Submenu Item
After selecting the item to adjust, do the following:
1.
With the separate item field displayed, use the arrow buttons to select and adjust the
desired settings as indicated by the yellow arrows on the screen. (To rapidly increment
or decrement the values, press and hold the arrow button.)
Example:
In figure 23, the yellow right and left arrows next to the
H
setting indicate
that you can press the
t
and
buttons on the front panel to adjust the horizontal position.
To adjust the vertical position, press the
and
buttons, as indicated by the yellow up
and down arrows next to the
V
setting.
2.
When finished, press
Enter
to return to the
OSD
menu.
DSC HD-HD 4K Plus A Series • Operation
24