Extron electronics DMP 64 User Manual Download Page 85

Page: 85 / 152

Embedded Web Pages

The embedded web pages, accessible via LAN using a web browser, include the following
information, available in a tabbed interface.

•

System Status —

The opening web page, displaying a report of system status

parameters.

•

Configuration —

this tab contains the following left menu items.

System Settings. Contains IP address and date/time settings.

Passwords. Enter/re-enter admin and user password fields to set up password
protected access.

Firmware Upgrades. Browse/upload firmware to the device.

•

File Management —

Delete or upload files

•

Control —

contains the following left menu items:

Audio Settings. Includes mix matrix, input and output gain control.

Group Controls. Provides access-only to the group controls.

Presets. Used to save new presets created on Audio Settings page.

•

See

HTML Operation

for further details.

Windows-based Program Control

The DSP Configurator Control Program is compatible with Windows 2000, Windows
XP and Vista, and provides remote control of the input gain/attenuation, output volume
output adjustment, and other features.

DSP Configurator can control the DMP 64 via any of the three control ports, RS-232, USB,
or LAN.

Updates to this program can be downloaded from the Extron Web site at

www.extron.com

Installing the DSP Configurator Program

The program is contained on the Extron Software Products disk.

Install the software as follows:

Insert the disk into the drive

Click the Software tab or software icon.

NOTE:

If the DVD setup program does not start automatically, run

Launch.exe

from the DVD ROM directory using Windows “My Computer”.

DMP 64 • Software Control

Summary of Contents for DMP 64

























































































































































Search results

Summary of Contents for DMP 64

Reviews:

Related manuals for DMP 64

Brands by name

Popular brands

Extron electronics DMP 64, User Manual

Search results

Summary of Contents for DMP 64

Reviews:

Related manuals for DMP 64

Brands by name

Popular brands