Extron electronics DMP 64, User Manual

Page: 118 / 152

8.
To push all of the DSP Configurator gain and processor block adjustments
(configuration), and all presets to the DMP 64, proceed to step
9
.
To tailor the push (push only the configuration, only the presets, or the configuration
and selected presets), click the
Advanced
button and proceed to step 8a .
a.
Select the Custom radio button.
b. Select the desired checkbox(es);
Push Configuration
and/or
Push Presets
. If
Push Configuration
is the only box checked, click
OK
and proceed to step 9 .
NOTE:
Push Configuration includes all mix-point, gain and processor block
settings. It does not include partial presets.
c.
If
Push Presets
was clicked in step 8b , click
All
to select all presets or
Selected
to
choose specific presets.
•
If
Selected
was clicked, click
OK
and proceed to step
8d
.
•
If All was clicked (equivalent to a standard push), click OK and proceed to
step
9
.
d. If
Selected
was clicked in step 8c , the Synchronize with Device dialog box ( 7b )
reappears. Click
OK
. The presets dialog box appears.
e.
Select the desired partial presets to push by clicking the appropriate checkbox(es).
f.
Click
OK
. — Proceed to step
10.
9.
Click OK . The DSP Configurator program is connected live to the device and the
processors, and presets are pushed or pulled as selected, completing the selection of
Live
mode.
10.
If changes were made to the DSP parameters (including mix-point, gain and/or
processor blocks) since the last file save, the DSP Configurator prompts to save the
file. Click
Yes
or
No
, as desired,
If a password was required and not entered or if an incorrect password was entered,
the program prompts for the password.
The configuration and/or presets will be uploaded to the DMP 64.
DMP 64 • Software Control 112