Extron electronics DMP 64, User Manual

Page: 109 / 152

Configuring a Group Master
Configure a group as follows:
1. Click
Tools | Configure Groups
to open the Configure Groups dialog box.
or click View | Group Controls and then click the Add a Group menu selection.
2. In the
Select Group
drop-down box, click a group to select it (figure 52). The list
defaults to the first empty group. Select an empty group if necessary, or select an
existing group to overwrite.
Figure 52. Configure Groups Add Group Dialog Box
NOTE:
<empty>
groups have no group members assigned. Numbered groups (such
as
<Group #1>
) have controls assigned that may be overwritten if selected.
3.
In the
Select Control Type
section, expand the tree for the type of control,
Gain
or
Mute
, then select the desired control type. When a selection is made in the Select
Control Types section, the
Available Group Members
section populates with all
possible members for the selected control type.
NOTE:
Potential group members in step 4 that are already assigned to a different
group are displayed in blue .
4. In the
Available Group Members
section, make appropriate selections by clicking
the checkbox(es). When a + sign exists, click to expand the tree and select individual
controls. Up to 16 group members may be added.
5.
Click the
Apply
button to create or configure the group.
6. Repeat steps 2 through 5 to create or configure up to 32 groups.
7.
Click the
Close
button to exit the configure groups dialog box.
DMP 64 • Software Control 103