Label
Color and Status
Description
Amber (steady)
The switch encountered an error when running the diagnostic
software.
Amber (blinking)
The switch is booting and running diagnostic software. This is
normal activity during the boot process.
Green (steady)
The switch loaded the agent software code and is operating
normally.
Green (blinking)
The switch is loading the agent software code.
RPS
Off
A second power supply is not present in either PSU1 or PSU2.
Amber (steady)
The second power supply in PSU1 or PSU2 is removed.
Amber (blinking)
The second power supply, which was operating in PSU1 or
PSU2, is either a fault condition or a PSU is present but not
supplying power.
Green (steady)
The second power supply (in either PSU1 or PSU2) is present
and operating normally as a redundant power supply (RPS).
Green (blinking)
The second power supply (in either PSU1 or PSU2) is present,
but the AC input has been disconnected.
Fan
Amber (steady)
A fan module has been removed.
Amber (blinking)
A fan module has failed.
Green (steady)
All fan modules are operating normally.
Management port LED state indicators
This section describes the management port LED state indicators by color and fluctuation cues.
The management port uses two bi-colored LEDs to indicate the activity and speed of the link.
• The LED on the left side of the port (
Speed
) indicates the current speed of the port.
• The LED on the right side of the port (
Link/Act
) indicates the status of the link and whether
or not it’s active.
Table 15: Management port LED state indicators
Label
Color and Status
Description
Speed
Off
The port is operating at 10 Mbps.
Amber (steady)
The port is operating at 100 Mbps.
Green (steady)
The port is operating at 1 Gbps.
Link/Act
Off
N/A
Amber (steady)
The port admin is disabled.
Amber (blinking)
The port is not in use.
Green (steady)
The port has no data activity.
Green (blinking)
The port has data activity.
LED state definitions
December 2017
Installing the VSP 8000 Series
85
