show sys-info temperature
Example
Check the status of the fan modules.
VSP-8000:1>show sys-info fan
Fan Info :
Fan Id Fan Status Fan Type
---------------------------------------
1 up regularSpeed
2 up regularSpeed
3 up regularSpeed
4 up regularSpeed
Check the internal temperature of the switch.
VSP-8000:1>show sys-info temperature
Temperature Info :
CPU Temperature MAC Temperature PHY1 Temperature PHY2 Temperature
26 29 24 27
LED state definitions
The figures and tables in the following sections describe the LEDs on the VSP 8000 Series switch.
The tables describe LED operation for a switch that finishes the power-on self-test.
Warning:
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into
an optical fiber or connector port. Always assume that fiber-optic cables are connected to a
light source.
Switch LEDs
The following table describes the main switch LED state indications provided by LED color and
fluctuation cues.
Table 14: Switch LED state indicators
Label
Color and Status
Description
PWR
Off
The switch is not receiving power and not operating.
Green (steady)
The switch is receiving power from either one of the power
supplies (if two power supplies are installed).
Green (blinking)
The system is in reset.
Status
Off
The switch is non-operational.
Table continues…
Installing the Virtual Services Platform 8000 Series
December 2017
Installing the VSP 8000 Series
84
