• The VSP 8404 DC model (EC8400001-E6) ships with a DC power supply wiring
assembly for the DC power supply.
• The VSP 8404 AC PS No PC GSA model (EC8400A01–E6GS) does not include a
power cord. This model is TAA compliant.
• The VSP 8404 AC PS NA PC GSA model (EC8400E01–E6GS) includes a North
American power cord. This model is also TAA compliant.
• The VSP 8404C “A” model (EC8400A02-E6) does not include a power cord for the AC
power supply. All other models include a country-specific power cord.
• The VSP 8404C DC model (EC8400002-E6) ships with a DC power supply wiring
assembly for the DC power supply.
• The VSP 8404C AC PS No PC GSA model (EC8400A02-E6GS) does not include a
power cord. This model is TAA compliant.
• The VSP 8404C AC PS NA PC GSA model (EC8400E02–E6GS) includes a North
American power cord. This model is also TAA compliant.
5. Four field-replaceable fan modules
6. Documentation
Note:
A 300mm-900mm slide rack mounting kit is available as an option.
Installing the VSP 8000 Series in an equipment rack
Note:
The instructions in this section apply to all switches in the VSP 8000 Series. The illustrations
show the VSP 8200 as an example, but the instructions apply to any switch in the series.
There are different ways to install a VSP 8000 Series switch in an equipment rack. Refer to one of
the following sections:
• Slide Rack Mount Kit-This is a separately ordered option that you can use to install your
switch in equipment racks that range from 300 mm to 900 mm deep. For installation
instructions, see
Using the optional slide rack mount kit
• Brackets-The switch comes with brackets that you can install in one of two positions on the
chassis:
- Use the mid-chassis position for a two-post rack.
- Use the front panel position of the chassis for a four-post rack.
Installing the VSP 8000 Series in an equipment rack
December 2017
Installing the VSP 8000 Series
37
