Installing Ridgeline on a Multi-Homed Server
Ridgeline Installation and Upgrade Guide
45
Figure 36: Ridgeline Server Setup Utility
3
Choose one of the setup options:
-
Use this IP address to launch the clients and to talk to the network devices.
This selection is not relevant for a multi-homed system, because it only specifies a single interface
for all communications.
-
Use this host name to launch the clients.
If you choose this option, clients should use
the displayed hostname to communicate with Ridgeline. Ridgeline will determine which IP
address to use to communicate with network devices.
-
Use this host name to launch the clients and this IP address to talk to the
network devices.
If this is selected, clients should use the displayed hostname to communicate
with Ridgeline, and choose an IP address from the drop-down list for network device
communication.
4
Optionally, specify a different HTTP port.
5
Click Confirm. A confirmation dialog is displayed.
6
Click OK on the confirmation dialog, then close the setup utility.
7
Start the Ridgeline server.