manualshive.com logo in svg

Expresso lift2move, Operating Manual

Share
Download
Expresso lift2move Operating Manual Download Page 48

May 2014

48

lift2move

 Lifting aid 

10.2 Trouble 

shooting

Motor does not run

 

●

Check the battery voltage.

 

●

Check the fuses. The fuses are located in the battery pack.

 

●

Check all electrical connections (plugs) while the batteries are being 
charged.

 

●

Check the lamp functions (indicator LEDs) during charging

Lift carriage does not 
move although motor
is running

 

●

Check the battery voltage.

 

●

Make sure that max. payload has not been exceeded.

 

●

Make sure that the lifting pillar has been mounted correctly and is 
in the right position (see Chapter

 

6 Assembly / Disassembly

).

Load handling
attachment moves
too slowly

 

●

Check the battery voltage.

 

●

Check all electrical connections (plugs) while the batteries are being 
charged.

 

●

Check the lamp functions (indicator LEDs) during charging.

Noises during up/down 
movement of load
handling attachment

 

●

Clean the lifting pillar, grease the ball screws and the spindle 
(see Section 

9.3 Annual measures

).

DANGER!

When opening covers, parts that are electrically 
live may become exposed – make sure they are 
not short-circuited. Even if all electrical power 
sources have been disconnected, certain compo-
nents in the control unit can still have an electrical 
charge.

During all repair work on the electrical system , 
the cables to the battery terminals must be 
disconnected.

Functional faults

Summary of Contents for lift2move




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands