lift2move
Lifting aid
May 2014
31
Push handle
The height of the push handle is freely adjustable for the user‘s
convenience.
This is done by releasing the two black turning knobs and adjusting
the required height. Subsequently, the turning knobs must be
tightened again to
fi
x the push handle height.
Turning knobs
*
NOTE!
i
i
To ensure an ergonomic working posture, the push
handle should always be adjusted to the correct
height.
Check the handle height
every time
before star-
ting work, and readjust it if necessary.
While moving the lifter, always keep both hands centrally inside the
push handle.
This will prevent hand injuries, e.g. when coming too close to a wall,
a corner, or some other obstacle.
*) All illustrations are exemplary.
Operation
Do not stand under the load!
