Make sure to position the pressure transducer the right way up.
NB
Do not blow into the valves on the XTP.
Outdoor fitting of the pressure transducer (XTP)
When fitting the pressure transducer outdoors, make sure to position it in a place where it is not affected by
wind, rain, etc. When fitted outdoors, the pressure transducer should ideally be positioned in a box with a hole
(dia. 2 mm) in the bottom. The purpose of this box is to assure correct reference pressure – through the hole –
and to keep water out.
If the pressure transducer is positioned in a place where insects have access to the free end, fitting a sinter filter is
recommended.
1.4
Layout of the user interface
1.4.1
Panel
F
A
B
C
D
E
Pos.
Part
Function
A
Alarm
• indicates alarms
B
Display
• displays operation and changes in the user interface (menu system)
• indicates alarms
• shows normal operation status
C
and
• forward or back in the menu system
• increase/reduce set point
D
• reset alarm
• return to operation screen
E
• select menu item
• confirm/save changes of set point or parameters
F
Light emitting diodes
• shows status of inputs and outputs
RESET
OK
3002878-EBC20-UK
Product information •
7
Product information •
7
