4.5
User menu
Layout of the user menu
The user menu consists of a single level and provides access to 4 parameters:
Menu
Function
Range
1
Setting the required pressure
Depending on the XTP-range set
in menus 151 and 152
2
Setting the pre-purge period for the fan
0-999 s
3
Setting the post-purge period for the fan
0-60 min
4
Displaying current alarm (see alarm overview page
36)
-
When the instructions refer to the menu numbers 1, 2, 3 and 4 it is understood that these numbers refer to the user
menus.
4.5.1
Operating the user menu
Setting up the operating function
Before you can use the EBC20 for pressure controlled regulation of
exodraft
supply air fans, you will have to change the
operating function.
For setting up the operating function, see page 15.
Using the buttons
Step
Press...
To...
1
OK
• Activate the user menu
2
and
• Go to the menu item you wish to edit
3
OK
• Edit the menu item selected
4
and
• Adjust the required set point
5
OK
• Confirm and save the required set point
6
RESET
Return to operation screen.
NB: If you do not press
RESET
the EBC20 will automatically
return to the operation screen after 30 seconds
You can always undo an action (that you have not confirmed by pressing
OK
) and return to the operation screen by
pressing
RESET
.
Adjust the set points for user menu items 1–4 as shown in the example on the following page.
Alarms
For alarm handling (menu 5), see page 35.
3002878-EBC20-UK
Pressure-controlled regulation •
33
