3.6
Set-up
NB
Remember to set up the operating function of the EBC20 as described on page 15
3.6.1
Setting the chimney fan output
Use the following procedure to adjust the chimney fan output:
Step
Action...
The display shows...
1
• Press
OK
to go to menu 1. The output for stage 1
(LOW) will be displayed.
2
• Press
3
• Press and until the output you require for
stage 1 (LOW) (in this example 41%) is displayed.
• Press
OK
to confirm and save the setpoint
4
Only for 2-stage systems:
• Press
to go to menu 2 and the settings for stage 2
(HIGH).
5
• Repeat steps 2–3 of the procedure, only this time use
them to regulate stage 2.
• To finish, press
RESET
.
NB
If you do not press any buttons for 30 seconds, the EBC20 will automatically switch back to the operation screen.
OK
3002878-EBC20-UK
2-stage speed regulation •
29
