RME1-TC User’s Manual - Thermocouple Acquisition Module
Exemys
Table 26 - Telnet commands
Command: Syntax
Description
END
Ends configuration
HELP
Lists configuration commands
LIST
Shows configuration values
IP configuration
NETCONFIG:ip_addr,netmask,gateway
Netconfig:0.0.0.0, 0.0.0.0, 0.0.0.0 Enables DHCP service
HOSTNAME:name
Device’s name
PASSWORD:XXXXXX
Device’s password (XXXXXX is the password to configure)
FACTRESET
Set configuration to factory default
RESET
Restart the device
ALIST
Lists inputs value and status
Configuration of input ‘n’ Type:
1= Thermocouple E
2= Thermocouple J
3= Thermocouple K
4= Thermocouple N
5= Thermocouple R
AINPUT:type
6= Thermocouple S
7= Thermocouple T
AALARMn:hb,vb,ha,va
Alarms enable and set points
hb: enable low alarm(0,1)
vb: set point low alarm
ha: enable high alarm(0,1)
va: set point high alarm
ANAMEn:name,visualize
Input 'n' name and enable to visualize in web
Modbus Exceptions
EXCEPTIONS:option
option: E(enable), D (disable)
SNMP enable
SNMPENABLE:option
option: E(enable), D (disable)
SNMP traps enable
SNMPTRAPSENABLE:option
option: E(enable), D (disable)
SNMPMANAGER1:ip_addr
SNMP Manager 1 IP address
SNMPMANAGER2:ip_addr
SNMP Manager 2 IP address
SNMPREADCN:name
SNMP read community
SNMPWRITECN:name
SNMP write community
SNMPTRAPCN:name
SNMP trap community
www.exemys.com Rev.
1
Page
41
