RME1-TC User’s Manual - Thermocouple Acquisition Module
Exemys
Appendix
A
Appendix
A Mounting of the device on DIN rail
The RME1-TC can be mounted on a DIN rail.
To fasten the module to this type of rail, orientate the upper part of the device towards
the rail, then fit the slot of the adapter on the upper edge, such as it is shown in the figure
below. Push the RME1-TC firmly until you hear a click at the moment of fastening the
module on the DIN rail.
Click !
DIN Rail
DIN Rail
DEVICE LATERAL VIEW
Figure 27 -Device assembly
To disassemble the device from the rail, first take the device terminals off. Then introduce
a screwdriver in the RME1-TC DIN connector lower clasp and push the connector
downwards until the module can be removed from the rail.
www.exemys.com Rev.
1
Page
31
