RME1-TC User’s Manual - Thermocouple Acquisition Module
Exemys
Figure 13 - Exemys device locator
•
DEVICE: Name of the device, such as RME1-TC or SSE232-ST
•
MAC ADDRESS: Hardware Ethernet Address of the device.
•
VERSION: Firmware version running in that device
•
PASSWORD
•
HOST: Name of the equipment of NBNS identification
•
DHCP: If the CheckBox is activated, the device net parameters will be obtained from a
DHCP server.
•
IP: IP address configured in the device.
•
NETMASK: Subnet mask configured in the device
•
GATEWAY: Output from a net to others.
IMPORTANT:
It is not necessary for the device to be properly configured. If the device is correctly connected
and working, it will be found by the Device Locator Application Program.
To refresh the grid, click on the “Query Network” button. This action will make the device
Locator search any Exemys device in the network again.
You can change any of these basic network parameters within the Device Locator program.
To configure any Exemys device found by the Device Locator:
•
Select the device in the grid and click on the “Properties” button, or open the “Actions”
menu and select the “Properties” command. You will see the Properties dialog box.
•
All Exemys devices provide a Remote Configuration Password. This password is used by
the Web configuration page and remote command Console in the device.
www.exemys.com Rev.
1
Page
16
