Excalibur RS-260-EDP, Operation Manual

Page: 9 / 16

Feature #9 - Last Door arming
Off (press “ start ” 1 time to program) - DEFauLt
On w/o doors locking
(press “
start
” 2 times to program)
On w/ doors locking (press “ start ” 3 times to program)
“Last Door Arming” has the system automatically arm itself every time you exit the
vehicle (the complete operation is described on page 5).
Feature #10 - automatic Rearming
Off (press “ start ” 1 time to program) - DEFauLt
On w/o doors locking (press “ start ” 2 times to program)
On w/ doors locking
(press “
start
” 3 times to program)
Enhanced auto rearm
(press “
start
” 4 times to program)
“Automatic Rearming”, described on page 5, rearms the alarm if accidentally dis-
armed. Options are to have Automatic Rearming operate with or without also locking
the doors when the system does rearm. Enhanced auto rearm allows you to cancel
the rearming sequence by pressing unlock a 2nd time after disarming.
user Programmable Features (cont’d)
Feature #6 - Open Door Bypass of ignition Locking
On (press “ start ” 1 time to program) - DEFauLt
Off (press “ start ” 2 times to program)
This feature cancels the automatic locking or unlocking of the vehicle’s doors if one of
the doors is open when the ignition switch is turned on or off.
Feature #5 - ignition controlled Lock/unlock
Off (press “ start ” 1 time to program) - DEFauLt
Lock w/ ignition On (press “ start ” 2 times to program)
unlock w/ ignition Off
(press “
start
” 3 times to program)
Lock and unlock w/ ignition (press “ start ” 4 times to program)
This feature controls the lock/unlock operations when the ignition key is turned on/off.
Feature #7 - unlock w/ trunk Release
On
(press “
start
” 1 time to program)
- DEFauLt
Off (press “ start ” 2 times to program)
“2nd channel” is most commonly used for trunk release, in which case the alarm
should also disarm. This feature, when on, configures the system to unlock/disarm
when the 2nd channel is activated. This feature is only available when using CarLink.
Feature #8 - Remote Start activation From the Remote
Press “ start ” button 1 time (press “ start ” 1 time to program)
Press
“
start
”
button 2 times
(press “
start
” 2 times to program)
- DEFauLt
Press
“
start
”
button 3 times
(press “
start
” 3 times to program)
Press “ start ” button 4 times (press “ start ” 4 times to program)
This feature changes how the remote start feature is activated from the remote.
Feature #4 - BROwn wire audible Output
Pulsed horn Low (press “ start ” 1 time to program) - DEFauLt
Pulsed horn medium (press “ start ” 2 times to program)
Pulsed horn high (press “ start ” 3 times to program)
Steady Siren (press “ start ” 4 times to program)
This changes the BROWN wire’s audible output when the alarm is triggered. Steady
siren must be selected when using a siren (other horn outputs stay at the Medium
setting). The horn honk options will affect all horn honk outputs used as well as
change the BROWN wire’s function.
9