installer Programmable Features (cont’d)
Feature #11 - manual transmission mode
On
(press “
start
” 1 time to program)
Off
(press “
start”
2 times to program)
- DEFauLt
This feature changes the parameters of the system’s remote start operation to be suitable for
manual transmission-equipped vehicles via a “setup” procedure which must be followed upon exit-
ing the vehicle to ensure the transmission is in neutral.
Feature #10 - turbo timer
Off
(press
“
start
” 1 time to program)
- DEFauLt
Run 1 minute
(press “
start
” 2 times to program)
Run 2 minutes
(press “
start
” 3 times to program)
Run 3 minutes
(press “
start
” 4 times to program)
This feature, the operation of which is described on page 7, when turned on
configures the system to automatically keep the engine running briefly after the key is turned off.
This operation is designed specifically for vehicles with turbocharged engines. NOTE: This feature
is dependent on the proper wiring of the neutral safety circuit.
Feature #9 Remote Start Lock control
Off
(press
“
start
” 1 time to program)
- DEFauLt
Lock after Start
(press
“
start
” 2 times to program)
unlock before start
(press
“
start
” 3 times to program)
unlock Before RS & Lock after RS
(press “
start
” 4 times to program)
This feature allows for OEM alarm/lock control in relation to remote start operations thus eliminat-
ing extra wiring for OEM alarm control.
Feature #12 Data Port Protocol
Green: DBi, Black: DBi
(press “
start
” 1 time to program)
- DEFauLt
Green: iData, Black: iData
(press “
start
” 2 times to program)
Green: DBi, Black: iData
(press “
start
” 3 times to program)
Green: iData, Black: DBi
(press “
start
” 4 times to program)
This feature determines which data protocol is used on each data port. Choose this based on the
accessory being connected to the port.
nOtE: when a BLaDE is inserted, this feature auto-
matically switches to the aDS protocol.
Feature #13 - Virtual alarm
On
(press “
start
” 1 time to program)
Off
(press “
start
” 2 times to program)
- DEFauLt
This feature converts the system into a strictly Keyless Entry/Remote Start System by eliminating
all antitheft alarm-oriented operations and features.
Feature #14 - Pulse ignition On Disarm
On
(press “
start
” 1 time to program)
Off
(press “
start
” 2 times to program)
- DEFauLt
This feature will pulse the ignition and activate any attached immobilizer bypass module for
vehicles that require the ignition to be turned on to disarm the OEM alarm.
Feature #8 - Door Lock/unlock Outputs
0.8 Second Outputs
(press
“
start
” 1 time to program)
- DEFauLt
3
Second
Outputs
(press “
start
” 2 times to program)
Double Pulse unlock Output
(press “
start
” 3 times to program)
total closure Lock Output
(press “
start
” 4 times to program)
This changes the system’s doorlocking outputs to suite different vehicle requirements. The total
closure setting provides a 28 second lock pulse (press LOCK or UNLOCK is during the pulse to
stop it) and a 0.8 second unlock pulse.
12
