background image

table Of contents

Transmitter Overview ................................................................................................... 2

Transmitter Functions ................................................................................................... 3

Other Remote Start Features ....................................................................................... 4

Low Battery/Low Temp Automatic Starting ............................................................... 4

Turbo Timer Feature ................................................................................................. 4

Pit-Stop Feature ....................................................................................................... 4

Manual Transmission Starting .................................................................................. 4

2-Way Controller Options  (RS-265-EDP+ Only) .......................................................... 4

Selecting Mute & Audible Modes .............................................................................. 4

Security System Features (OPTIONAL) ....................................................................... 5

Last Door Arming ...................................................................................................... 5

Automatic Rearming ................................................................................................. 5

Pre-Warn Detection .................................................................................................. 5

When The System Triggers ...................................................................................... 5

Using The Valet Switch ................................................................................................. 6

Emergency Override ................................................................................................ 6

Valet Mode ................................................................................................................ 6

The Status Light ........................................................................................................... 6

Anti-Carjacking Protection ............................................................................................ 7

Programming Transmitters ........................................................................................... 7

Programming Features ................................................................................................. 8

User Programmable Features ...................................................................................... 8

Installer Programmable Features ............................................................................... 10

Programmable Features Matrix .................................................................................. 15

transmitter Overview

“start” 

button

transmitter part number:

2-way: 115-03

 (RS-265-EDP+ only)

1-way: 113-03

Call your dealer or visit 

www.caralarm.com to order 

replacement transmitters.

Battery replacement:

Remove the small screw from the  

lower back case, and separate 

the transmitter halves. Replace 

the battery and reassemble the 

transmitter case.

115-03

Battery type:

CR2032 (Qty: 1)

113-03

Battery type:

CR2016 (Qty: 2)

2

Summary of Contents for RS-260-EDP

















Reviews: