background image

LOcK / aRm: 

 While the system is unlocked / disarmed, Press 

and hold the “START” button for 1 second.

• 

THE SIREN / HORN WILL CHIRP & THE PARKING 

LIGHTS WILL FLASH ONCE.

• 

2-way RESPOnSE: 

CONTROLLER WILL BEEP ONCE 

AND THE BUTTON WILL FLASH ONCE.

transmitter Functions

unLOcK / DiSaRm: 

 While the system is locked / armed, Press 

and hold the “START” button for 1 second.

• 

THE SIREN / HORN WILL CHIRP TWICE & THE 

PARKING LIGHTS WILL FLASH TWICE, THEN ILLUMINATE 

FOR 30 SECONDS.

• 

2-way RESPOnSE: 

CONTROLLER WILL BEEP TWICE 

AND THE BUTTON WILL FLASH TWICE.

REmOtE StaRt: 

 Press and release the “START” button twice 

within 5 seconds. (see user feature #8 for additional options)

• 

THE PARKING LIGHTS WILL FLASH ONCE & THE STATUS LIGHT 

WILL FLASH RAPIDLY.  

• 

2-way RESPOnSE: 

THE CONTROLLER WILL PLAY A MELODY.

• 

THE SYSTEM WILL PROCEED TO START THE ENGINE. 

• 

ONCE THE ENGINE IS RUNNING, THE PARKING LIGHTS WILL FLASH 

EVERY 1.5 SECONDS & THE STATUS LIGHTS WILL FLASH SLOWLY.

• 

2-way RESPOnSE:

 THE CONTROLLER BUTTON WILL FLASH ONCE 

EVERY 2 SECONDS.

• 

If the engine stalls, the system will make up to 3 more attempts.

• 

Each time you park, set the climate controls as desired when you use the remote start. The 

engine will run for the preset run time (see user feature #1). 

• 

Run time Expiration warning (2-way models only)

: The controller will beep once when 1 

minute remains in remote start cycle.

• 

Run time Extender

: Press the “START” button one time during remote start to restart the 

engine run timer.

nOtE: this can only be used once per remote start cycle. 

• 

If you decide not to drive your vehicle, you can turn off the remote start using the same method 

to turn it on (Default = press “START” twice in 5 seconds) 

nOtE: if remote start activation is programmed for 1 press, the 1st press activates Run 

time Extender so an additional press is required to turn off remote start.

• 

Upon entering the vehicle during remote start mode, turn the ignition key to the “ON/RUN” posi-

tion (

nOt StaRt!!

). When you press the brake pedal, the remote start will turn off, 

allowing the ignition key to take over.

x2

3

Summary of Contents for RS-260-EDP

















Reviews: