background image

LaSt DOOR aRminG

  This system can be configured to arm automatically when all the vehicle’s doors are closed 

(see user feature #9). When enabled, the siren/horn will chirp once when all of the doors are 

closed. It will start a 30 second countdown (indicated by a fast flashing status light) after which, 

the system will lock and/or arm. The 30 second arming delay will paused while a point of entry is 

open. Turning ON the ignition key will cancel the arming sequence until the key is turned off and 

the doors are all closed once again. 

NOTE: Installer feature #13 must be on and the system must be wired for security.

autOmatic REaRminG

  This automatically rearms  the alarm if the system is disarmed from the remote. (see user 

feature #10). When disarmed by remote, the system will start a 90 second countdown (fast flash

-

ing status light) to arm the system. This is useful if the controller accidentally disarms the system 

when it’s kept in a purse or pocket where other items could potentially press the buttons.  

NOTE: Installer feature #13 must be on and the system must be wired for security functions

whEn thE SyStEm tRiGGERS

  If the system were to be compromised while armed, it will trigger sounding the siren/horn and 

flashing the parking lights for 30 seconds (programmable). When disarming the system after a 

trigger event, the siren/horn will chirp 4 times and the parking lights will flash 4 times instead of the 

standard 2 times.

LOcK On tRiGGER:

 If a door is opened when the system is triggered, it will wait until the door is 

closed again, then lock the doors. This patented feature is useful to further deny a thief of further 

access to the vehicle.

StORm SaFE mODE:

 When the system is triggered, disarming the system will stop the alarm 

from sounding but will leave the doors locked. This function is useful if you have a false triggering 

situation due to violent weather.

ZOnE ViOLatiOn REcaLL:

 The system is capable of telling you which zones were triggered 

last. The system’s status light will flash to indicate which zone was triggered. This occurs dur

-

ing the alarm cycle AND after disarming. The system will store the last triggered zone until the 

vehicle’s ignition key is turned on. See “The Status Light” section on page 9 for further explanation 

of this feature.

nuiSancE PREVEntiOn:

 If the system prewarns 5 times within 15 minutes, it will bypass the 

zone for the remainder of the 15 minutes before rearming the pre-warn zone. Additionally, if a full 

trigger zone is left open, the system will trigger a total of 3 times before bypassing the zone. Once 

the zone is closed, it will re-arm that zone.

Security System Features (OPtiOnaL)

PRE-waRn DEtEctiOn

EXtERnaL SEnSORS aRE OPtiOnaL uPGRaDES. taLK tO yOuR DEaLER.

 The optional 

impact sensor is designed, in addition to detecting a full impact, to warn away potential violators 

when it detects a light impact to the vehicle. The system will respond by chirping the siren/horn 3 

times and locking the doors. This is very useful when an intruder attempts to unlock the door.

  This system is equipped with our exclusive 

VIRTUAL ALARM 

technology. The se-

curity functions described in this section are available as a simple upgrade from your 

dealer. It may require a plug-in module and some additional configuration, but will 

greatly enhance your system’s capabilities and add theft deterrence to your vehicle. 

TALK TO YOUR DEALER TODAY ABOUT UPGRADING!

5

Summary of Contents for RS-260-EDP

















Reviews: