The controller can operate up to 2 different systems When controlling 2 systems, it
will receive all status updates on the currently selected vehicle profile and will receive
only trigger alerts for the 2nd vehicle You can switch from one car to the other at
anytime Use the following steps to change vehicles
SELECTinG CAR #1 OR CAR #2
Vehicle #1:
Press the “P” and “LOCK” buttons for 1 second to select Car #1 The
controller will beep/vibrate once and the clock will change to “CAR 1”
Vehicle #2:
Press the “P” and “UNLOCK” buttons for 1 second to select Car #2 The
controller will beep/vibrate twice and the clock will change to “CAR 2”
multi-Car Operation
Controller Options
LCD SCREEn iCOnS
Battery Level
melody/Vibrate
Valet mode
hood
Trigger
Carjack mode
Alarm Status
Remote Start
Shutdown
Clock / Timer
Door Trigger
in Range
indicator
Sensor
Trigger
1)
Press the “P” button for 5 seconds to access the controller features The controller
will beep twice
2)
Press and release the “P“ button once to select the clock (hour digits will flash).
3)
Press the “TRUNK“ button to scroll up or the “START“ button to scroll down
4)
Press the “P” button to switch to the minute digits
5)
Press the “TRUNK“ button to scroll up or the “START” button to scroll down
6)
Wait 10 seconds or press the “P” button for 5 seconds to exit programming The
controller will beep once
SETTinG ThE CLOCK
All primary commands sent to the system have a confirmation response that is
sent to the controller to indicate that the command was successful If the command is
successful, the icon will not display the “X” in the middle of the icon If no response is
received within a few seconds, the “X” will be displayed indicating that you may be out
of range of your system
in-RAnGE inDiCATOR
Remote Start
indicator
12