using The Valet Switch
SECuRECODE
SecureCode allows you to customize the number of valet presses required to per-
form an emergency override This is an extra layer of security that prevents anyone
from overriding the alarm even if they have a key to the vehicle SecureCode has 2
stages with the first requiring 1-9 button valet presses and the second requiring 0-9
valet button presses This gives you 99 possible combinations To program a custom
SecureCode, please refer to user feature #13 on Page 18
To perform an emergency override with SecureCode, use the following steps:
STEP 1 -
With the system armed, enter the vehicle (the alarm will activate)
STEP 2 -
Turn the ignition switch to the “ON” position
STEP 3 -
Within 5 seconds of step 2, press the valet switch to enter the first digit of
your programmed code
STEP 4 -
After a few seconds, the siren will stop sounding and chirp once (confirming
stage 1) The siren will then continue sounding
STEP 5 -
Now, within 5 seconds of step 4, press the valet switch to enter the second
digit of your code If the code is correct, the alarm will disarm
If the code is entered incorrectly, you must turn the ignition key OFF, then back
ON to try again
Additionally, if 2 failed attempts are made, the alarm will ignore any
further attempts for 2 minutes
VALET mODE
Valet mode completely disables all security & remote start functions Keyless entry
is still operable To enter valet mode, perform the following steps:
STEP 1 -
Disarm the system by remote or by performing an emergency override
STEP 2 -
Press and hold the valet switch for 2 seconds The system will chirp once
and the status light will turn on
EXiTinG VALET mODE
- Press and release the valet switch once The status light
will turn off
EmERGEnCy OVERRiDE
If you were to lose or break your controller, you’d need to perform an emergency
override to disarm the system and use your vehicle To do so, use the following steps:
STEP 1 -
Enter the vehicle (the alarm should sound)
STEP 2 -
Turn the ignition key to the “ON” position
STEP 3 -
Press the valet switch (located in the window-mount antenna) once
NOTE: Enter your SecureCode at this time if programmed via user feature #13
STEP 4 -
Turn the ignition key “OFF”
10
