FireAngel HT-230 User Manual Download

Page: 1 / 20

User Manual

Mains Operated Thermoptek Smoke Alarm

Mains Operated Heat Alarm

Mains Operated Thermoptek Smoke Alarm with Wi-Safe 2

Mains Operated Heat Alarm with Wi-Safe 2

ST-230 / HT-230 / WST-230 / WHT-230

Drawing No:

GN5562

Revision:

Drawn By:

Tschaka RM, May 2019

FireAngel Safety Technology Limited. Artwork Information

Ensure that you are printing / manufacturing from the original artwork file and not a preview

CONFIDENTIAL:

The information provided in this document is proprietary to FireAngel Safety Technology Limited and

as such should only be used/shared for the exclusive manufacture of those products specified.

Title/Description:

User Manual

Material:

Refer to MS0032

Used On / Used For:

Generic FA Pro heat / smoke

Size:

W - 121mm / H - 129mm

Supplier:

FLEX

Print Colours:

BLACK

Content Quality:

Chris CB

Product Information:

Greg B

Certification marks:

Ian B

APPROVAL:

Messaging:

Chris D

TEST YOUR ALARM WEEKLY

Summary of Contents for HT-230





















Search results

Summary of Contents for HT-230

Reviews:

Related manuals for HT-230

Brands by name

Popular brands

FireAngel HT-230, User Manual

Search results

Summary of Contents for HT-230

Reviews:

Related manuals for HT-230

Brands by name

Popular brands