Exabyte VXA-2, Product Manual, Page: 15 / 90

D
ECEMBER
2003 VXA-2
5
C
OMPONENTS
On/Off Switch Used to turn power on and off.
AC Power Connector Used to provide power through a grounded AC power
connector. A power cord is included with the tape drive.
Serial Connector Used to connect the tape drive to the serial port of a
computer for performing diagnostic operations with VXA2Tool (see page 34 ).
SCSI Connectors (SCSI tape drive only) Used to connect the tape drive to the
SCSI bus with two SCSI cables or one SCSI cable and a terminator. These
connectors are 68-pin, wide, Ultra2 LVD connectors.
SCSI ID Switch (SCSI tape drive only) Used to set the SCSI ID.
FireWire Connector (FireWire tape drive only) Used to connect the tape
drive to the host system FireWire controller.
Figure 1-7 External FireWire drive: back-panel components
AC power
connector
Serial
connector
On/off
switch
FireWire
connector