Exabyte MAGNUM 1X7 LTO AUTOLOADER, Product Manual

Page: 24 / 162

8
P
RODUCT
M
ANUAL
1012581
C
HAPTER
2—I
NSTALLING THE
A
UTOLOADER
C
OMPLETING THE
U
NPACKING
P
ROCESS
The robotic cartridge loader inside the autoloader is secured with a small metal
shipping key to keep the loader from moving during shipping. Before
operating the autoloader, you must remove this shipping key. To remove the
shipping key:
1.
1. 1.
1. Remove the adhesive label securing the shipping key to the autoloader (see
Figure 2-1 ).
2.
2. 2.
2. Lift the shipping key up and out of the slot in the top of the autoloader (see
Figure 2-2 ).
3. 3. 3. 3. Save the shipping key with the autoloader’s packing materials in case you
need to move or ship the autoloader later.
! ! ! !
Important
After unpacking the autoloader, save all the original packing
materials in case you need to ship or move the autoloader later.
Figure 2-1 Label over shipping key
Figure 2-2 Removing the shipping key
Remove this label
Shipping
key